ALL PLASTIC
LABORATORY FIXTURES
• Deionized
Water • Corrosive Atmospheres • Demineralized
Water • Distilled Water
Polyvinyl Chloride
(PVC), Polypropylene (PPRO) & PVDF
All Plastic Service
Fixtures with Special Molded Needle Valve near the base of the
fixture for fine adjustment of fluids.
These fixtures are compatible with all laboratory services
lines and are resistant to internal and environmental corrosion,
abrasion
and leaching in the presence
of high purity distilled and deminerialized waters. They are produced in
standard 3/8” FNPT and 1/2” MNPS sizes and
are compatible with all conventional services, including
water, all gases, hot and cold water, vacuum,
etc.
Left Handed Versions Available – Call Factory for Pricing
Includes Fig. No. 500 Fixture Connector Nipple in matching
plastic and PVC locknut and “O” Ring for sealing base of fixture to seating surface.
These Fixture Connector Nipples are supplied with 3/8” FNPT and ½” MNPS.
*Fixtures with needle valve
Ball Valve
Fixtures – PVC Only
 Direct Operated Fixtures
have a special molded ball valve near the base for quick opening
and closing.
Includes Fig. No 500 Fixture Connector Nipple in matching plastic
and PVC locknut and “O” Ring for sealing base of fixture to seating
surface. These Fixture Connector Nipples are supplied with 3/8” FNPT
and ½” MNPS.
Remote Operated
Fixtures
(PVC, Polypropylene, & PVDF)
High purity water usage
demands special materials of construction to prevent contamination,
whether the usage is in research or production. Plastinetics® offers a laboratory gooseneck fixture manufactured completely
from un-pigmented polypropylene. Laboratory tests have established
that there is virtually no
pickup of either organic or inorganic material from the
virgin polypropylene materials of construction.
Polypropylene’s excellent resistance to chemical
attack by most acids and solvents makes this fixture most
suitable
for installation
inside fume
hoods where the fixture will be subject to a corrosive
environment.
The intelligent design of our laboratory service fixtures enhance the appearance
of either a laboratory or production facility, promotes efficiency and reduces
maintenance resulting from glass breakage.
Includes Fig. No. 500 Fixture Connector Nipple in matching
plastic and PVC locknut and “O” Ring for sealing base of fixtures to sealing surface.
These Fixture Connector Nipples are supplied with 3/8” FNPT and ½” MNPS.
Ultra Pure Recirculating Laboratory Fixtures
PLASTINETICS® recirculating laboratory fixture is the ideal
choice for your Ultra Pure Water System in the pharmaceutical,
biotechnology
and semi-conductor
industries. The recirculating gooseneck fixture is designed
to eliminate potential area of contamination and areas of
bacteria build-up.
PLASTINETICS® recirculating goosenecks feature all-plastic
construction. Fixtures are available in unpigmented, natural
Polypropylene and
unpigmented PVDF.
The intelligent design of our laboratory service fixtures enhance the appearance
of either a laboratory or production facility, promotes efficiency and reduces
maintenance resulting from glass breakage.
Includes Fig. No. 500 Fixture Connector Nipple in matching plastic
and PVC locknut and “O” Ring for sealing base of fixtures to sealing surface.
These Fixture Connector Nipples are supplied with 3/8” FNPT and ½” MNPS.
|
