|
Specifications/Properties
CORZAN® (CPVC)
Properties and Data Sheet
Polypropylene Properties and Data Sheet
Corzan®
CPVC
PLASTINETICS®...The #1 Source
For Custom Fabricated Exhaust Systems
PROPERTIES OF CORZAN® CPVC...
Corzan® CPVC duct is manufactured from
a specialty blend of material with unique physical properties that
safely withstands temperatures up to 200°F (93°C), making
it ideal for hot corrosive fumes. CPVC is essentially immune to
direct chemical attack by virtually all acids, bases, salts, aliphatic
solutions, oxidants and halogens.
In addition to its chemical inertness and good
mechanical strength, CPVC products have excellent flammability properties.
CPVC will not support combustion and is rated as self-extinguishing.
Independent testing has been conducted and has confirmed a flame
spread of 0-5 and smoke generation of 15-25 (see chart).
While PLASTINETICS® Inc. specialty is to
prefabricate entire fume exhaust systems to your specifications,
we also manufacture and supply fume duct pipe, fittings, dampers,
stacks, caps, blast gates, etc. for field assembly. Corzan® CPVC can be assembled by solvent cementing, hot gas welding and/or
flanged connections.
 |
Pipe
Sizes |
O.D. |
Part # |
Avg.
Wall |
Weight per foot |
| 6" |
6.625" |
DUPI-060-C |
.187" |
2.555 Lbs |
| 8" |
8.625" |
DUPI-080-C |
.187" |
3.349 Lbs |
| 10" |
10.750" |
DUPI-100-C |
.187" |
4.192 Lbs |
| 12" |
12.750" |
DUPI-120-C |
.187" |
4.986 Lbs |
| 14" |
14.000" |
DUPI-140-C |
.187" |
5.485 Lbs |
| 16" |
16.000" |
DUPI-160-C |
.187" |
6.273 Lbs |
| 18" |
18.000" |
DUPI-180-C |
.187" |
7.580 Lbs |
| 20" |
20.000" |
DUPI-200-C |
.219" |
9.146 Lbs |
| 24" |
24.000" |
DUPI-240-C |
.250" |
12.536 Lbs |
Corzan® CPVC
Duct Physical Properties
|
GENERAL
|
|
Value |
|
Test Method |
|
Cell Classification
|
|
23437
|
|
ASTM D1784
|
|
Specific Gravity
|
|
1.53
|
|
ASTM D792
|
|
Water Absorption
% increase 24 hrs. @ 25°C
|
|
0.20
|
|
ASTM D1784
|
|
Hardness, Rockwell
|
|
118
|
|
ASTM D785
|
|
Poisson's ration
@ 73°F
|
|
.430
|
|
|
| |
|
|
|
|
| MECHANICAL |
|
|
|
|
| Tensile Strength, psi @ 73°F |
|
7,960 |
|
ASTM D638 |
| Modulus of Elasticity, psi
@ 73°F |
|
373,000 |
|
ASTM D638 |
| Flexural Strength, psi @ 73°F |
|
13,300 |
|
ASTM D790 |
| Flexural Modulus, psi @ 73°F |
|
348,000 |
|
ASTM D790 |
| Compressive Strength, psi @
73°F |
|
6,000 |
|
ASTM D695 |
| Compressive Modulus, psi @
73°F |
|
120,000 |
|
ASTM D695 |
| Izod Impact, ft-lb/in @ 73°F |
|
2.0 |
|
ASTM D256 |
| |
|
|
|
|
| THERMAL |
|
|
|
|
| Coefficient of Linear Expansion
(in/in/°F) |
|
3.9 x 10-5 |
|
ASTM D696 |
| Heat Distortion Temperature,
°F |
|
225 |
|
ASTM D256 |
| |
|
|
|
|
| ELECTRICAL |
|
|
|
|
| Dielectric Constant 60Hz, 30°F |
|
2.90 |
|
ASTM D150 |
| Power Factor, 1000Hz |
|
0.012 |
|
ASTM D150 |
| Harvel CPVC Duct is non-electrolytic
|
|
|
|
|
| |
|
|
|
|
| FIRE RESISTANCE |
|
|
|
|
| Flammability Rating |
|
V-0 |
|
UL 94 |
| Flame Spread |
|
5 |
|
ULC |
| Smoke Generation |
|
15-25 |
|
ULC |
| Burning Rate, (in/min) |
|
Self-Extinguishing |
|
|
| Softening Starts (approx.) |
|
295°F |
|
|
| Material Becomes Viscous |
|
395°F |
|
|
| Material Carbonizes |
|
450°F |
|
|
| Limiting Oxygen Index (LOI) |
|
55 |
|
ASTM D2863 |
|
Factory Mutual (FM) Testing: PLASTINETICS®,
Inc. CPVC Duct products are manufactured from Noveon Inc.
CORZAN® CPVC compounds, which have been evaluated
in accordance with Factory Mutual Test Protocol 4910 and
has met the requirements
thereof (FM-4910).
Underwriters Laboratories of Canada: (*ULC)
- PLASTINETICS®, Inc. CPVC Duct (6" thru 24") is manufactured
from CORZAN® CPVC compound, as produced by
Harvel Plastics Inc., Easton, PA. This CPVC Seamless Extruded
Round Duct exhibits a Flame Spread rating of 5 and Smoke
Developed Rating of 15-25. All characteristics per CAN/ULC-S102.2-M88.
Key Industrial Fabricator Program: PLASTINETICS®,
Inc. was one of the first fabricators to become listed under
Noveon Inc.'s new CORZANTM Key Industrial
Fabricator Program. |
SOLVENT CEMENTING -- CPVC
Belled-end duct, fittings
such as couplings, elbows and other socket-style fittings can
be joined using the solvent-cementing process. This process involves
the application of a primer and solvent cement to join system
components. When properly conducted, this method provides a strong,
homogeneous joining area in which the mating surfaces are chemically
fused together, producing a strong, leak-tight seal when cured.
A socket depth of 3” (all sizes) will provide sufficient
joint strength for most systems. Since duct dimensional tolerances
can be appreciable when compared to heavy wall pipe, the use
of extra-heavy-bodied CPVC cement (such as IPS 729) is recommended
due to the cement’s excellent gap-filling properties.
IPS Weld-On #729 is
a heavy duty (paste-like) high strength cement. It has excellent
gap properties, which become particularly desirable where a sizable
gap exists between pipe and fitting.
Additional information
can be obtained by calling the IPS Corporation, Compton, California
310-898-3300, Fax: 310-898-3390, www.ipscorp.com.
Maximum Internal Negative
Pressure Rating
Inches of water @ various
Temperatures °F
|
| Size |
Temperature °F |
| |
73 |
100 |
120 |
140 |
160 |
180 |
200 |
|
| 6" |
426 |
371 |
316 |
263 |
208 |
153 |
98 |
| 8" |
193 |
168 |
143 |
118 |
93 |
70 |
45 |
|
| 10" |
100 |
86 |
73 |
60 |
48 |
35 |
23 |
| 12" |
60 |
51 |
43 |
36 |
28 |
20 |
13 |
|
| 14" |
45 |
38 |
33 |
26 |
21 |
15 |
10 |
| 16" |
30 |
26 |
21 |
18 |
13 |
10 |
6 |
|
| 18" |
26 |
23 |
20 |
16 |
13 |
10 |
6 |
| 20" |
28 |
25 |
21 |
16 |
13 |
10 |
6 |
|
| 24" |
20 |
18 |
15 |
13 |
10 |
6 |
3 |
PSI = Inches of Water
x .0631;
Inches of Mercury =
Inches of Water x .07355
NOTE: Maximum
values stated are for extruded duct pipe only, and incorporate
a 1.5:1 safety factor. Consideration should be given to system
design, method of fabrication, and joining which may require
additional system derating. The use of compressed air or gasses
is not recommended for use with PVC/CPVC Duct piping.
Data courtesy of Harvel Plastics - Printed
by permission.
HANGERS
Hangers selected shall
have an adequate load-bearing surface free of rough or sharp
edges, shall not cause damage to the duct during use, and are
to be of a type that will not restrict linear movement of the
system due to expansion and contraction.
Maximum Hanger Support
Spacing in Feet
|
| Size |
Temperature °F |
| |
73 |
100 |
120 |
140 |
160 |
180 |
200 |
|
| 6" |
10 |
10 |
10 |
10 |
10 |
8 |
8 |
| 8" |
10 |
10 |
10 |
10 |
10 |
8 |
8 |
|
| 10" |
10 |
10 |
10 |
10 |
10 |
10 |
10 |
| 12" |
10 |
10 |
10 |
10 |
10 |
10 |
10 |
|
| 14" |
12 |
12 |
12 |
12 |
10 |
10 |
10 |
| 16" |
12 |
12 |
12 |
12 |
12 |
10 |
10 |
|
| 18" |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
| 20" |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
|
| 24" |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
Above based
on an allowable 1/8" deflection.
Data courtesy of Harvel Plastics, Inc. Printed by permission.
REINFORCEMENT
Due to Harvel CPVC Duct’s
inherent rigidity, additional system reinforcements or flanges
are not required for 6” through 24” sizes (.187” average
wall or higher) up to 100°F and
10” of negative internal
static pressure, provided proper support spacing requirements
are followed. Reinforcements are not required for systems under
positive pressure when standard support spacing requirements
are followed.
POLYPROPYLENE
Polypropylene Physical Properties
| PHYSICAL PROPERTIES |
|
Data | |
Units |
| Density/Specific Gravity | | 0.907 | | | | Melt Flow | |
0.50 @ L-230 °C/2.16
kg |
| g/10 min | | Water Absorption @ 24 hrs | | 0.02 | | % | | MECHANICAL | | | | | | Elongation @ Yield | |
13.0 | | % | | Flexural Modulus | | 231000 | | psi | | Tensile Strength @ Yield | | 5240 | | psi | | IMPACT | | | | | | Notched Izod Impact | |
3.02 @ 73.2 °F | | ft-lb/in | | HARDNESS | | | | | | Rockwell Hardness | | 95 R-Scal | | °C | | THERMAL | | | | | | Coef Linear Thermal Exp | |
5.420E-05 | | in/in-°F | | Deflection Temp @ 66 psi | | 201 | | °F | | UL | | | | | | Rel Temp Indx Elect | |
230 @ 0.0401
in | | °F | | Rel Temp Indx Mech w/Imp | |
230 @
0.0401 in | | °F | | Rel Temp Indx Mech w/olmp | |
230
@ 0.0401 in | | °F | | UL Flammability | | HB @ 0.0582 in | | |
CAUTION: Polypropylene resins
are attacked however by Halogens, fuming Nitric Acid and other
active oxidizing agents, as well as by Aromatic and Chlorinated
Hydrocarbons at elevated temperatures.
Fume Exhaust (Duct) Piping Large
Diameter Sizes 14"-36"
Polypropylene provides a highly reliable and
economic means of solving a broad range of applications which require
a wide operating temperature range coupled with the outstanding
chemical and solvent resistance properties: temperatures up to 230°F.
PLASTINETICS® Inc. can offer this product
in numerous styles and variations: round, square or rectangular
by employing the most modern manufacturing techniques. Sizes available:
standards
  |
O.D. |
Part
# |
Wall
Thickness |
| 14" |
DUPI-140-Y |
1/8" |
| 16" |
DUPI-160-Y |
1/8" |
| 18" |
DUPI-180-Y |
1/8" |
| 20" |
DUPI-200-Y |
3/16" |
| 22" |
DUPI-220-Y |
3/16" |
| 24" |
DUPI-240-Y |
3/16" |
| 26" |
DUPI-260-Y |
3/16" |
| 28" |
DUPI-280-Y |
3/16" |
| 30" |
DUPI-300-Y |
3/16" |
| 32" |
DUPI-320-Y |
3/16" |
| 34" |
DUPI-340-Y |
3/16" |
| 36" |
DUPI-360-Y |
3/16" |
| Above supplied
in 4-foot lengths and will be natural in color |
Larger Sizes Are Available. Please Consult
Factory.
Flame Retardant Available For Most Diameters.
Consult factory for prices and minimum purchase
quantities. Couplings, fittings, hoods and related products available
in all configurations. Fittings are plain end. Loose couplings are
available for field assembly.
With over 32 years of experience, PLASTINETICS® offers
you quality and dependability in the manufacturing of exhaust
systems. Consult factory for prices and minimum purchase quantities.
Couplings, fittings, hoods and related products available in
all configurations.
Corzan® CPVC is a registered
trademark of Noveon Inc.
CORZANTM Key Industrial Fabricator Program is a trademark of Noveon
Inc.
  
|
